This dataset contains the extent, name and unique ID number of the Drainage Basins in the State of Queensland, as defined by the Australian Water Resources Management Committee (WRMC).
Resource purpose/summary
To provide an authorative single point of truth for the extent of Drainage Basins in the State Queensland. It is suitable for use in land administration, emergency and water management, monitoring of climate change, hydrological modelling, topographic and vegetation mapping and in the production of navigational and web based mapping applications.
Id Po C
Contact—individual name
Resources, LANDS, SI, TDIM, Senior Spatial Information Officer, Topographic Data Management
Contact—organization name
Department of Resources
Contact—position name
Senior Spatial Information Officer, Topographic Data Management
Dataset created and owned by Department of Resources for the State of Queensland using base information owned by Federal Government Agencies and has no use limitations.
Unrestricted to all levels of government and community. Data is available to all government agencies, community groups and individuals. Dataset is available through physical supply and may be made available via web delivery tools, for example, through DNRME's internet sites.
Supplemental information about the data
The dataset was captured at 1:100 000.
The seaward edge of this data aligns with the Coastline and State Border - Queensland dataset.
Feature Types: DRAINAGE BASIN - A region of land where water from rain drains downhill into a body of water, such as a river, lake, dam, wetland, sea or ocean. The extent of land covered by a drainage basin was originally determined by the Australian Water Resources Management Committee (WRMC).
Attributes: BASIN_NAME - The name of the Drainage Basin BASIN_NUMBER - A unique number allocated to the Drainge Basin
Australia is divided into a number of Drainage Divisions, Queensland is covered by five Drainage Divisions -Bulloo, Gulf, Lake Eyre, Murray Darling and North East Coast and each is allocated a unique ID number Those rivers flowing into the Coral Sea in Queensland are classified as being within the North East Coast Drainage Division which has been allocated the number one (1) Drainage Divisions are broken into smaller Drainage Basins based on the major rivers in those divisions e.g. Burdekin Drainage Basin, Fitzroy Drainage Basin. All Drainage Basins are allocated a unique ID number starting with the unique ID number of the Drainage Division they are within. Based on the unique number of the Drainage Basin, a user can determine which Drainage Division the basin is within. All drainage Basins within the North East Coast Drainage Division have been allocated a unique number starting with 1. e.g. The Burdekin Drainage Basin is number 12, the Fitzroy Drainage Basin is number 14 and so on.
Flow is determined using low rainfall. It areas of flat terrain, high rainfall can cause water to flow across watersheds.
This dataset is stored in an ESRI Geodatabase. Some columns names may be shortened if downloaded in the ESRI shape format.
Dq Info
Report
Data quality report, measure description
Capture is complete
Report
Data quality report, measure description
Data should be free from overshoots, undershoots, duplicate lines. Drainage lines should not cross division boundaries.
Report
Data quality report, measure description
Accuracy of the data is dependent on the accuracy of the elevation data of the associated 1:100000 topographic map. This data is suitable for scales 1:100000 and greater.
Report
Data quality report, measure description
Attribute naming was validated against the names supplied by the Australian Water Resources Management Committee (WRMC) and has an accuracy of 100%.
Data Lineage
Lineage statement, a general explanation
The location of Australia’s Drainage Basins were originally defined by the Australian Water Resources Management Committee (WRMC). To accurately plot the location of the boundaries, the definition of the basins were compared with 1:100000 topographic mapping (published and unpublished) and the location of the watershed based on the contours was plotted onto hard copy maps. These plotted lines were later digitised to create a spatial dataset. With the 1:250000 drainage network as a background, checks were made to ensure that no drainage lines crossed a division boundary.
Drainage Basins are subsets of and have boundaries that are aligned to and nested with the associated Drainage Division. Please refer to the Drainage Division - Queensland dataset.
In 2020, the seaward edge of the data was moved to align with the Coastline and State Border - Queensland dataset.
Source layer: EPP Water SEQ Environmental Values Subcatchments
(catchment-story/albert/alb-catch.shp.xml)
Esri
Creation Date
2016-04-06
Creation Time
11:20:56
Modification Date
2015-03-27
Modification Time
10:24:09
Data Id Info
Id Citation
Title
EPP Water SEQ Environmental Values Subcatchments
Edition
Version 2.0
Cit Resp Party
Contact—organization name
Department of Environment and Heritage Protection
Role
details available on request
Cit Resp Party
Contact—organization name
Department of Environment and Heritage Protection
Role
details available on request
Additional human language abstract/description
The South East Queensland Environmental Values Sub-catchments dataset defines the sub-catchments for which locally derived environmental values have been set under the Environmental Protection (Water) Policy 2009. NOTE: This version of the dataset incorporates data from both of the previous SEQ-Moreton Bay and Mary-Great Sandy regions.
Resource purpose/summary
This is one of four datasets that comprise the South East Queensland Environmental Values Schedule 1 Database July 2010. These datasets provide the spatial context for the Environmental Values (EVs) and Water Quality Objectives (WQOs) scheduled under the Environmental Protection (Water) Policy 2009, made under the Environmental Protection Act 1994.
Restricted to within the Department of Environment and Resource Management. Dataset is not available for viewing or use outside the Department of Environment and Resource Management.The use of the dataset is subject to the conditions of access detailed in the data usage agreement, signed between the Custodian and the Recipient. No third party usage is permitted other than indicated in the agreement.
Res Const
Consts
Security use limitations
The conditions of access are detailed in the data usage agreement, signed between the Custodian and the Recipient. No third party usage is permitted other than indicated in the agreement.
Supplemental information about the data
This is one of four datasets that comprise the South East Queensland Environmental Values Schedule 1 Database July 2010. These datasets provide the spatial context for the Environmental Values (EVs) and Water Quality Objectives (WQOs) scheduled under the Environmental Protection (Water) Policy 2009, made under the Environmental Protection Act 1994. The datasets are: 1. South East Queensland Watertypes v2.0; 2. South East Queensland Management Intent for Waters v2.0; 3. South East Queensland Environmental Values Sub-catchments v2.0; 4. South East Queensland Environmental Values Scheduled Plan Outline v2.0. To implement the EVs and WQOs, these datasets must be used together, with the relevant scheduling document, and their use may be complemented by overlaying drainage and waterbodies of 1:100k scale or finer. For further information refer to: ANZECC (2000) Australian and New Zealand guidelines for fresh and marine water quality. Australian and New Zealand Environment and Conservation Council (ANZECC) and the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). Department of Environment and Resource Management (2009) Queensland Water Quality Guidelines, Version 3 http://www.derm.qld.gov.au/water/health/monitoring_assessment.html
Dist Info
details available on request
Dq Info
Report
Data quality report, evaluation method description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
This dataset has been derived as a desktop study from varying data sources and has not been verified on the ground. Derived attributes are listed below. The polygon attributes have not been validated. Polygon Fields: Catch1: Name of first catchment division in hierarchy - attempts to capture each separate freshwater / estuarine drainage catchment e.g. Noosa River as defined by catch1 all drains to the mouth of the Noosa River. For coastal catchments / features a collection of drainage catchments are referred to e.g. Noosa coastal drainage or Moreton Bay Islands. Catch2: Name of second catchment division in hierarchy - attempts to divide any sub-catchments or inter-catchments within each catch1. Catch3: Name of third catchment division in hierarchy - attempts to divide any sub-catchments or inter-catchments from catch2. Name: Name used for most detailed sub-division i.e. copied from catch1, catch2 or catch3.
REQUIRED: A brief narrative summary of the data set.
Purpose
REQUIRED: A summary of the intentions with which the data set was developed.
Citation
Citation Information
Originator
REQUIRED: The name of an organization or individual that developed the data set.
Publication Date
REQUIRED: The date when the data set is published or otherwise made available for release.
Title
wbb_subcatchments_v1_1
File or Table Name
wbb_subcatchments_v1_1
Geospatial Data Presentation Form
vector digital data
Status
Progress
REQUIRED: The state of the data set.
Maintenance and Update Frequency
REQUIRED: The frequency with which changes and additions are made to the data set after the initial data set is completed.
Keywords
Theme
Theme Keyword Thesaurus
REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.
Theme Keyword
REQUIRED: Common-use word or phrase used to describe the subject of the data set.
Access Constraints
REQUIRED: Restrictions and legal prerequisites for accessing the data set.
Use Constraints
REQUIRED: Restrictions and legal prerequisites for using the data set after access is granted.
Data Id Info
Id Citation
Title
KGari_Dissolve
Metadata Reference Information
Metadata Standard Name
FGDC Content Standards for Digital Geospatial Metadata
Metadata Standard Version
FGDC-STD-001-1998
Metadata Contact
Contact Information
Contact Organization Primary
Contact Person
Manager, Biodiversity Assessment
Contact Organization
REQUIRED: The organization responsible for the metadata information.
Contact Voice Telephone
13 74 68 (13 QGOV)
Metadata Date
2011-07-25
Distribution Information
Resource Description
Downloadable Data
Dist Info
Distributor
details available on request
Entity and Attribute Information
details available on request
Data Quality Information
Lineage
details available on request
Logical Consistency Report
feature class wbb_subcatchments_v2 was copied from V:\wbb\subsections\working\WbbSubsections.gdb\wbb and renamed WBB_subcatchments.
For Kolan and Burrum catchments the subcatchments were derived from the information provided by Maria Zann. Her advice was also sought for delineating the subcathcments in Fraser Island
Source layer: Environmental Protection Water Policy - Subcatchments - Queensland
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
Shows areas of subcatchments as described in Environmental Protection (Water) Policy. Subcatchment areas are used to define environmental values and water quality objectives.
Resource purpose/summary
Shows areas of subcatchments as described in Environmental Protection (Water) Policy.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Heritage Protection makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Subcatchments are used to define areas with similar environmental values and water quality objectives. These values and objectives are described and defined in the associated scheduling documents.
Dq Info
Report
Data quality report, measure description
Complete. This dataset contains all subcatchments scheduled under EPP Water.
Report
Data quality report, measure description
This dataset is consistent with EPP Water
Report
Data quality report, measure description
Positional accuracy is fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Data quality report, evaluation method description
Fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Data Lineage
Lineage statement, a general explanation
1. Merged subcatchments from each of the regional datasets 2. Dissolved on subcatchment field 3. Performed identity with schedule outlines to pick up schedule document name
Source layer: Environmental Protection Water Policy - Subcatchments - Queensland
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
Shows areas of subcatchments as described in Environmental Protection (Water) Policy. Subcatchment areas are used to define environmental values and water quality objectives.
Resource purpose/summary
Shows areas of subcatchments as described in Environmental Protection (Water) Policy.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Heritage Protection makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Subcatchments are used to define areas with similar environmental values and water quality objectives. These values and objectives are described and defined in the associated scheduling documents.
Dq Info
Report
Data quality report, measure description
Complete. This dataset contains all subcatchments scheduled under EPP Water.
Report
Data quality report, measure description
This dataset is consistent with EPP Water
Report
Data quality report, measure description
Positional accuracy is fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Data quality report, evaluation method description
Fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Data Lineage
Lineage statement, a general explanation
1. Merged subcatchments from each of the regional datasets 2. Dissolved on subcatchment field 3. Performed identity with schedule outlines to pick up schedule document name
Source layer: Environmental Protection Water Policy - Subcatchments - Queensland
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
Shows areas of subcatchments as described in Environmental Protection (Water) Policy. Subcatchment areas are used to define environmental values and water quality objectives.
Resource purpose/summary
Shows areas of subcatchments as described in Environmental Protection (Water) Policy.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Heritage Protection makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Subcatchments are used to define areas with similar environmental values and water quality objectives. These values and objectives are described and defined in the associated scheduling documents.
Dq Info
Report
Data quality report, measure description
Complete. This dataset contains all subcatchments scheduled under EPP Water.
Report
Data quality report, measure description
This dataset is consistent with EPP Water
Report
Data quality report, measure description
Positional accuracy is fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Data quality report, evaluation method description
Fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Data Lineage
Lineage statement, a general explanation
1. Merged subcatchments from each of the regional datasets 2. Dissolved on subcatchment field 3. Performed identity with schedule outlines to pick up schedule document name
Source layer: Environmental Protection Water Policy - Subcatchments - Queensland
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
Shows areas of subcatchments as described in Environmental Protection (Water) Policy. Subcatchment areas are used to define environmental values and water quality objectives.
Resource purpose/summary
Shows areas of subcatchments as described in Environmental Protection (Water) Policy.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Heritage Protection makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Subcatchments are used to define areas with similar environmental values and water quality objectives. These values and objectives are described and defined in the associated scheduling documents.
Dq Info
Report
Data quality report, measure description
Complete. This dataset contains all subcatchments scheduled under EPP Water.
Report
Data quality report, measure description
This dataset is consistent with EPP Water
Report
Data quality report, measure description
Positional accuracy is fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Data quality report, evaluation method description
Fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Data Lineage
Lineage statement, a general explanation
1. Merged subcatchments from each of the regional datasets 2. Dissolved on subcatchment field 3. Performed identity with schedule outlines to pick up schedule document name
REQUIRED: A brief narrative summary of the data set.
Purpose
REQUIRED: A summary of the intentions with which the data set was developed.
Citation
Citation Information
Originator
REQUIRED: The name of an organization or individual that developed the data set.
Publication Date
REQUIRED: The date when the data set is published or otherwise made available for release.
Title
wbb_subcatchments_v1_1
File or Table Name
wbb_subcatchments_v1_1
Geospatial Data Presentation Form
vector digital data
Status
Progress
REQUIRED: The state of the data set.
Maintenance and Update Frequency
REQUIRED: The frequency with which changes and additions are made to the data set after the initial data set is completed.
Keywords
Theme
Theme Keyword Thesaurus
REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.
Theme Keyword
REQUIRED: Common-use word or phrase used to describe the subject of the data set.
Access Constraints
REQUIRED: Restrictions and legal prerequisites for accessing the data set.
Use Constraints
REQUIRED: Restrictions and legal prerequisites for using the data set after access is granted.
Data Id Info
Id Citation
Title
KGari_Dissolve
Metadata Reference Information
Metadata Standard Name
FGDC Content Standards for Digital Geospatial Metadata
Metadata Standard Version
FGDC-STD-001-1998
Metadata Contact
Contact Information
Contact Organization Primary
Contact Person
Manager, Biodiversity Assessment
Contact Organization
REQUIRED: The organization responsible for the metadata information.
Contact Voice Telephone
13 74 68 (13 QGOV)
Metadata Date
2011-07-25
Distribution Information
Resource Description
Downloadable Data
Dist Info
Distributor
details available on request
Entity and Attribute Information
details available on request
Data Quality Information
Lineage
details available on request
Logical Consistency Report
feature class wbb_subcatchments_v2 was copied from V:\wbb\subsections\working\WbbSubsections.gdb\wbb and renamed WBB_subcatchments.
For Kolan and Burrum catchments the subcatchments were derived from the information provided by Maria Zann. Her advice was also sought for delineating the subcathcments in Fraser Island
Source layer: lake
(catchment-story/lake-eyre-basin/lake.shp.xml)
Esri
Creation Date
2008-06-17
Creation Time
13:09:54
Modification Date
2020-08-28
Modification Time
16:22:26
Identification Information
Citation
Citation Information
details available on request
Dist Info
Distributor
details available on request
Data Quality Information
Lineage
details available on request
Data Id Info
Id Citation
Title
lake
Entity and Attribute Information
details available on request
Source layer: EPP Water SEQ Environmental Values Subcatchments
(catchment-story/logan/logan-catchment.shp.xml)
Esri
Creation Date
2016-04-06
Creation Time
16:10:43
Modification Date
2015-03-27
Modification Time
10:24:09
Data Id Info
Id Citation
Title
EPP Water SEQ Environmental Values Subcatchments
Edition
Version 2.0
Cit Resp Party
Contact—organization name
Department of Environment and Heritage Protection
Role
details available on request
Cit Resp Party
Contact—organization name
Department of Environment and Heritage Protection
Role
details available on request
Additional human language abstract/description
The South East Queensland Environmental Values Sub-catchments dataset defines the sub-catchments for which locally derived environmental values have been set under the Environmental Protection (Water) Policy 2009. NOTE: This version of the dataset incorporates data from both of the previous SEQ-Moreton Bay and Mary-Great Sandy regions.
Resource purpose/summary
This is one of four datasets that comprise the South East Queensland Environmental Values Schedule 1 Database July 2010. These datasets provide the spatial context for the Environmental Values (EVs) and Water Quality Objectives (WQOs) scheduled under the Environmental Protection (Water) Policy 2009, made under the Environmental Protection Act 1994.
Restricted to within the Department of Environment and Resource Management. Dataset is not available for viewing or use outside the Department of Environment and Resource Management.The use of the dataset is subject to the conditions of access detailed in the data usage agreement, signed between the Custodian and the Recipient. No third party usage is permitted other than indicated in the agreement.
Res Const
Consts
Security use limitations
The conditions of access are detailed in the data usage agreement, signed between the Custodian and the Recipient. No third party usage is permitted other than indicated in the agreement.
Supplemental information about the data
This is one of four datasets that comprise the South East Queensland Environmental Values Schedule 1 Database July 2010. These datasets provide the spatial context for the Environmental Values (EVs) and Water Quality Objectives (WQOs) scheduled under the Environmental Protection (Water) Policy 2009, made under the Environmental Protection Act 1994. The datasets are: 1. South East Queensland Watertypes v2.0; 2. South East Queensland Management Intent for Waters v2.0; 3. South East Queensland Environmental Values Sub-catchments v2.0; 4. South East Queensland Environmental Values Scheduled Plan Outline v2.0. To implement the EVs and WQOs, these datasets must be used together, with the relevant scheduling document, and their use may be complemented by overlaying drainage and waterbodies of 1:100k scale or finer. For further information refer to: ANZECC (2000) Australian and New Zealand guidelines for fresh and marine water quality. Australian and New Zealand Environment and Conservation Council (ANZECC) and the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). Department of Environment and Resource Management (2009) Queensland Water Quality Guidelines, Version 3 http://www.derm.qld.gov.au/water/health/monitoring_assessment.html
Dist Info
details available on request
Dq Info
Report
Data quality report, evaluation method description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
This dataset has been derived as a desktop study from varying data sources and has not been verified on the ground. Derived attributes are listed below. The polygon attributes have not been validated. Polygon Fields: Catch1: Name of first catchment division in hierarchy - attempts to capture each separate freshwater / estuarine drainage catchment e.g. Noosa River as defined by catch1 all drains to the mouth of the Noosa River. For coastal catchments / features a collection of drainage catchments are referred to e.g. Noosa coastal drainage or Moreton Bay Islands. Catch2: Name of second catchment division in hierarchy - attempts to divide any sub-catchments or inter-catchments within each catch1. Catch3: Name of third catchment division in hierarchy - attempts to divide any sub-catchments or inter-catchments from catch2. Name: Name used for most detailed sub-division i.e. copied from catch1, catch2 or catch3.
Data Lineage
details available on request
Entity and Attribute Information
details available on request
Source layer: Environmental Protection Water Policy - Subcatchments - Queensland
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
Shows areas of subcatchments as described in Environmental Protection (Water) Policy. Subcatchment areas are used to define environmental values and water quality objectives.
Resource purpose/summary
Shows areas of subcatchments as described in Environmental Protection (Water) Policy.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Heritage Protection makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Subcatchments are used to define areas with similar environmental values and water quality objectives. These values and objectives are described and defined in the associated scheduling documents.
Dq Info
Report
Data quality report, measure description
Complete. This dataset contains all subcatchments scheduled under EPP Water.
Report
Data quality report, measure description
This dataset is consistent with EPP Water
Report
Data quality report, measure description
Positional accuracy is fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Data quality report, evaluation method description
Fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Data Lineage
Lineage statement, a general explanation
1. Merged subcatchments from each of the regional datasets 2. Dissolved on subcatchment field 3. Performed identity with schedule outlines to pick up schedule document name
Source layer: PP_Geographic
(catchment-story/pumicestone/aoi-pp.shp.xml)
Esri
Creation Date
2013-05-15
Creation Time
11:07:31
Modification Date
2013-03-18
Modification Time
11:26:16
Data Id Info
Id Citation
Title
PP_Geographic
Dist Info
details available on request
Entity and Attribute Information
details available on request
Source layer: EPP Water SEQ Environmental Values Subcatchments
The South East Queensland Environmental Values Sub-catchments dataset defines the sub-catchments for which locally derived environmental values have been set under the Environmental Protection (Water) Policy 2009. NOTE: This version of the dataset incorporates data from both of the previous SEQ-Moreton Bay and Mary-Great Sandy regions.
Resource purpose/summary
This is one of four datasets that comprise the South East Queensland Environmental Values Schedule 1 Database July 2010. These datasets provide the spatial context for the Environmental Values (EVs) and Water Quality Objectives (WQOs) scheduled under the Environmental Protection (Water) Policy 2009, made under the Environmental Protection Act 1994.
Restricted to within the Department of Environment and Resource Management. Dataset is not available for viewing or use outside the Department of Environment and Resource Management.The use of the dataset is subject to the conditions of access detailed in the data usage agreement, signed between the Custodian and the Recipient. No third party usage is permitted other than indicated in the agreement.
Res Const
Consts
Security use limitations
The conditions of access are detailed in the data usage agreement, signed between the Custodian and the Recipient. No third party usage is permitted other than indicated in the agreement.
Supplemental information about the data
This is one of four datasets that comprise the South East Queensland Environmental Values Schedule 1 Database July 2010. These datasets provide the spatial context for the Environmental Values (EVs) and Water Quality Objectives (WQOs) scheduled under the Environmental Protection (Water) Policy 2009, made under the Environmental Protection Act 1994. The datasets are: 1. South East Queensland Watertypes v2.0; 2. South East Queensland Management Intent for Waters v2.0; 3. South East Queensland Environmental Values Sub-catchments v2.0; 4. South East Queensland Environmental Values Scheduled Plan Outline v2.0. To implement the EVs and WQOs, these datasets must be used together, with the relevant scheduling document, and their use may be complemented by overlaying drainage and waterbodies of 1:100k scale or finer. For further information refer to: ANZECC (2000) Australian and New Zealand guidelines for fresh and marine water quality. Australian and New Zealand Environment and Conservation Council (ANZECC) and the Agriculture and Resource Management Council of Australia and New Zealand (ARMCANZ). Department of Environment and Resource Management (2009) Queensland Water Quality Guidelines, Version 3 http://www.derm.qld.gov.au/water/health/monitoring_assessment.html
Dist Info
details available on request
Dq Info
Report
Data quality report, evaluation method description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
For all polygon records, all attributes were checked for consistent values. ArcGIS topology was used to ensure that no polygons are overlapping.
Report
Data quality report, measure description
This dataset has been derived as a desktop study from varying data sources and has not been verified on the ground. Derived attributes are listed below. The polygon attributes have not been validated. Polygon Fields: Catch1: Name of first catchment division in hierarchy - attempts to capture each separate freshwater / estuarine drainage catchment e.g. Noosa River as defined by catch1 all drains to the mouth of the Noosa River. For coastal catchments / features a collection of drainage catchments are referred to e.g. Noosa coastal drainage or Moreton Bay Islands. Catch2: Name of second catchment division in hierarchy - attempts to divide any sub-catchments or inter-catchments within each catch1. Catch3: Name of third catchment division in hierarchy - attempts to divide any sub-catchments or inter-catchments from catch2. Name: Name used for most detailed sub-division i.e. copied from catch1, catch2 or catch3.
Data Lineage
details available on request
Entity and Attribute Information
details available on request
Source layer: Environmental Protection Water Policy - Subcatchments - Queensland
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
Shows areas of subcatchments as described in Environmental Protection (Water) Policy. Subcatchment areas are used to define environmental values and water quality objectives.
Resource purpose/summary
Shows areas of subcatchments as described in Environmental Protection (Water) Policy.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Heritage Protection makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Subcatchments are used to define areas with similar environmental values and water quality objectives. These values and objectives are described and defined in the associated scheduling documents.
Dq Info
Report
Data quality report, measure description
Complete. This dataset contains all subcatchments scheduled under EPP Water.
Report
Data quality report, measure description
This dataset is consistent with EPP Water
Report
Data quality report, measure description
Positional accuracy is fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Report
Data quality report, measure description
The attributes have been populated and are consistent with EPP Water.
Data quality report, evaluation method description
Fit for purpose of identifying subcatchments and environmental values for the purpose of EPP Water
Data Lineage
Lineage statement, a general explanation
1. Merged subcatchments from each of the regional datasets 2. Dissolved on subcatchment field 3. Performed identity with schedule outlines to pick up schedule document name
This dataset is a Queensland-wide dataset that amalgamates the previous SEQ, Central and Wet Tropics datasets.
Additional human language abstract/description
This dataset shows the geographic areas covered by documents and maps scheduled under Environmental Protection (Water and Wetland Biodiversity) Policy. The dataset includes links to online documents and maps. For further information please refer to the EPP Water website: https://environment.des.qld.gov.au/management/water/policy
Resource purpose/summary
This dataset shows the geographic areas covered by documents and maps scheduled under Environmental Protection (Water and Wetland Biodiversity) Policy. Includes links to online documents and maps.
Whilst every care is taken to ensure the accuracy of this product, the Department of Environment and Science makes no representations or warranties about its accuracy, reliability, completeness or suitability for any particular purpose and disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages (including indirect or consequential damage) and costs which you may incur as a result of the product being inaccurate or incomplete in any way and for any reason.
Supplemental information about the data
Areas scheduled under the Queensland Environmental Protection (Water) Policy (EPP Water) are described in documents and paper / PDF maps. The area these documents and maps applies to are shown in this dataset, along with links to the online documents and maps themselves.
Dq Info
Report
Data quality report, measure description
This data is complete for the purposes for which it was collected.
Report
Data quality report, measure description
This data is consistent for the purposes for which it was collected.
Report
Data quality report, measure description
This data is accurate for the purposes for which it was collected.
Report
Data quality report, measure description
The attributes have been polulated and are consistent with EPP Water.
Report
Data quality report, measure description
This data is accurate for the purposes for which it was collected.
Data Lineage
Lineage statement, a general explanation
1. Merged schedule outlines from each of the regional datasets 2. Dissolved on schedule and Plan ID fields 3. Added schedule document link field and populated 4. Added schedule map link field and populated
Source layer: Drainage basin sub areas - Queensland
This dataset contains the extent, name and unique ID number of the Basin Sub Areas (subdivisions of major drainage basins) in the State of Queensland.
Resource purpose/summary
To provide an authorative single point of truth for the extent of Basin Sub Areas in the State Queensland. It is suitable for use in land administration, emergency and water management, monitoring of climate change, hydrological modelling, topographic and vegetation mapping and in the production of navigational and web based mapping applications.
Id Po C
Contact—individual name
Resources, LANDS, SI, TDIM, Senior Spatial Information Officer, Topographic Data Management
Contact—organization name
Department of Resources
Contact—position name
Senior Spatial Information Officer, Topographic Data Management
Drainage divisions, Drainage basins, Catchments, Sub basins
Thesa Name
Title
Common Search Terms
Date
Publication date
2016-12-13
Search Keys
Keyword
Queensland
Keyword
BOUNDARIES Biophysical Distribution
Keyword
WATER Hydrology Monitoring
Keyword
WATER Hydrology Mapping
Keyword
Inland waters
Keyword
Boundaries
Keyword
Drainage divisions, Drainage basins, Catchments, Sub basins
Res Const
Consts
Security use limitations
Dataset created and owned by Department of Resources for the State of Queensland using base information owned by Federal Government Agencies and has no limitations.
Unrestricted to all levels of government and community. Data is available to all government agencies, community groups and individuals. Dataset is available through physical supply and may be made available via web delivery tools, for example, through DNRME's internet sites.
Supplemental information about the data
The dataset's original purpose was to implant some location identifier into the numbering system of bores and gauging stations. For example all bore numbers were prefixed with a four-digit number. The first three were used to locate the bore into a specific major river basin .The forth digit was used to locate the bore into a subdivision of that major river basin as shown in the Basin Sub Areas - Queensland coverage. This coverage is now only used as a means of numbering bores and gauging stations.
The dataset was captured at 1:100 000.
The seaward edge of this data aligns with the Coastline and State Border - Queensland dataset.
Feature Types: BASIN SUB AREA - A sub division of a major drainage basin
Attributes: SUB_NAME - The name of the Basin Sub Area SUB_NUMBER - A unique number allocated to the Basin Sub Area
This dataset is stored in an ESRI Geodatabase. Some columns names may be shortened if downloaded in the ESRI shape format.
Dq Info
Report
Data quality report, measure description
Capture is complete. However new Basin Sub Areas may be added in the future.
Report
Data quality report, measure description
Data should be free from overshoots, undershoots, duplicate lines. Drainage lines should not cross basin boundaries.
Report
Data quality report, measure description
Accuracy of the data is dependent on the accuracy of the elevation data of the associated 1:100000 topographic map. This data is suitable for scales 1:100000 and greater.
Report
Data quality report, measure description
Information was obtained from the Gauging Station Catchments - Queensland dataset. Attribute naming was validated against this data and has an accuracy of 100%.
Data Lineage
Lineage statement, a general explanation
This data set was created as a consequence of a larger project involving the capturing of all gauging station catchments in Queensland. The polygons were constructed by: - Using the existing major & minor river basins as an external framework - Creating a clear overlay matching every 1:100 000 topographical map in Queensland - The clear overlay had all 1:250 000 river basin boundaries, the major and minor river basins as well as the corner points for each map sheet plotted on it - Using these 1:250 000 basin boundaries, the major and minor river basins and the topography from the 1: 100 000 topo maps as a guide, the Sub-Basin Areas were determined and traced on to the clear overlay - These basins were then digitised and stored in an ArcInfo coverage - RMS errors not > than 0.005 - Regions were created from the resulting polygons - Attributes pertaining to these regions are: Sub_Name; Sub_Number as definded by the Australian Water Resources Management Committee (WRMC).
River Basins are subsets of and have boundaries that are aligned to and nested with the associated Drainage Basin. Please refer to the Drainage Basin - Queensland dataset.
In 2020, the seaward edge of the data was moved to align with the Coastline and State Border - Queensland dataset.
Source file catchment-story/cooper-creek/cooper-interstate.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/diamantina/diamantina-interstate.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/georgina/georgina-interstate.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/lake-eyre-basin-animation/cooper-interstate.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/lake-eyre-basin-animation/diamantina-interstate.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/lake-eyre-basin-animation/georgina-interstate.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/lake-eyre-basin-animation/lake frome.kml last modified 5 December 2019 (missing metadata)
Source file catchment-story/water-park/WTLCatchmentBoundary.kml last modified 13 November 2019 (missing metadata)
This page should be cited as:
Department of Environment, Science and Innovation, Queensland (n.d.) Catchment stories – spatial metadata, WetlandInfo website, accessed 30 August 2024. Available at: https://wetlandinfo.des.qld.gov.au/wetlands/facts-maps/get-mapping-help/metadata/catchment-story/
— Department of Environment, Science and Innovation